9 English reviews written for 3DJAKE ecoPLA Matt White
28 customer reviews in all languages
5 stars | | 26 | (45%) |
---|---|---|---|
4 stars | | 17 | (29%) |
3 stars | | 9 | (15%) |
2 stars | | 2 | (3%) |
1 Stars | | 3 | (5%) |
Filter reviews:
-
-
M.
Rated with 5 out of 5 stars.
This filament is very good for object which needs matt finishing. But searching printer setting to minimize strings cannot ger good result.
But in my case, stringing effect doesn't affect my printing much.
I will re-order it.Was this rating helpful? (0) (0)
-
Brilliant filament
Rated with 5 out of 5 stars.
I have now printed about 20kg of this filament and I find it excellent. I don't print with anything else.
On my Prusa with a 0.6 nozzle you get very pleasant almost ceramic finish and pleasant layers. It sands down very well and takes additional finish (acrylics, varnish) very well.Was this rating helpful? (0) (0)
-
Very Good for Architectural printing... Needs effort tuning printer though!
Rated with 3 out of 5 stars.
From experience eco-PLA in general is like Marmite!
Even I have a love/hate relationship with this filament!
Pro's:
It has a very good finish that is perfect for architectural prints and models that will be painted,
It bridges really well,
It's a competitive price,
Being matte makes all but horrendous ringing nearly invisible.
Con's:
It's like PetG for hotend oozing,
Being matte any Z banding sticks out like a sore thumb,
It's strangely brittle,
Print with this a lot and a hardened or coated nozzle is required.
I have run this in all my printers at various times. This includes direct drive and bowden, stock to heavily modified, Cartesian, CoreXY and Delta printers.
Regardless all have needed tuning for this filament to print well!
Because of the PetG like tendency of this filament to ooze it is better suited for use with direct drive extruders!
You will need to run several retraction, temp and linear advance test prints to dial this filament in.
If you don't have the patience or don't understand what that means my advice is to avoid this eco-PLA or you WILL be disappointed!
If you are willing to give it a go, i suggest starting around here for temps and retractions:
Hotend:
First layer - 235-240c
Printing - 225c (below this and you will see layer adhesion issues and signs of under extrusion!)
Bridging - 215-220c
Bed:
First layer - 65c
Rest - 60c
Retractions:
bowden - 5mm @25-30mm/s
direct - 3.5-4mm @ 25mm/s
These settings are with an ambient room temp of 20-22c and ptfe lined hotends.
If you think of it kinda like low temperature PetG you should get it printing without too many headaches!Was this rating helpful? (7) (0)
-
Eco pla matt white
Rated with 5 out of 5 stars.
Really lovely giving an almost plaster of Paris finish.
Was this rating helpful? (0) (0)
-
3DJAKE ecoPLA Matt White
Rated with 5 out of 5 stars.
Very good! Prints look like from chalk!
Was this rating helpful? (0) (0)
-
very unhappy
Rated with 4 out of 5 stars.
This filament is truly disappointing. It's extremely brittle and brakes really easy. Layers don't stick together and it has huge problems with extruding from my stock .4 nozzle. I simply cannot print anything with it on my Creality Ender 3 Pro, which works perfectly fine with other filaments from 3DJake.
At least it has a nice matt finish that makes it look like a piece of chalk, but it's no use at all if I cannot make it work.
DO NOT BUY IT!Was this rating helpful? (1) (3)
-
Very good product
Rated with 5 out of 5 stars.
I use it on the Ender 3 Pro, bed temperature, 60C, extruder 200C and I get very nice results and a true matt and smooth finish which also somehow hides a lot of the layering created by these type of printers.
Was this rating helpful? (0) (0)
-
Ok pla
Rated with 3 out of 5 stars.
I thought this pla would be better for the price as I usually use anycubic white pla but they aren't making it at moment so I thought this looked like a good alternative but unfortunately I spent over an hour trying to get it to stick to my heated bed at 60c. I've never had any problems in the past with pla sticking I did finally get it to stick on about the 15th try but 5 minutes in I noticed part of a corner rising up were it had come away from the build plate!! I'm using anycubic mega s I wiped the bed down many times with a mix of water and alcohol but still no luck just wouldn't stick in the end I tried another brand and it stuck straight away no problems at all so I won't be trying the eco filament again �
I also noticed that the layers didn't look amazing not as good as the bq or the pla extra, I was using the eco pla at 210c on a 60c hotbed on a anycubic glass build plate..Was this rating helpful? (1) (2)
Magazine Articles:
Discover 3DJake:
-
Switzerland: Free standard delivery from CHF 69.90
-
Delivery in 3 business days.
More than 10.050 products
We deliver worldwide to
more than 40 countries
ecoPLA
Rated with 3 out of 5 stars.
Does what PLA should do. I really like the look of the material once printed.
One big drawback though, is that it doesn't fit into the Bambu Lab AMS unit.
That was a real bummer.
Was this rating helpful? (0) (0)