Mintion Beagle V2 Camera

The Beagle V2 Camera has been upgraded with some useful features compared to the previous version: Plug&Play, Remote Monitoring, Manual Focus and Time-Lapse Video. With the smart camera, you can detect printing problems in time and interrupt the printing process to avoid wasting time and materials.

Plug & Play

Beagle V2 is incredibly easy to use. Connect the camera and the 3D printer to power, download the Beagleprint app and register. Scan the code to connect to WiFi. Voila!

The camera supports both 2.4GHz and 5GHz WiFi.

Remote control and monitoring

With the camera, you can monitor the current printing status in real time! The printer can even be controlled remotely with the camera. This requires you to upload the print file to the camera via the Beagleprint app and remotely pause or cancel the print process as you wish or need!

If there is an unforeseen pause or interruption of the printing process, the camera will notify you via the app - in real time, of course. Even when the print is finished, you will be informed via the app.

Manual focus adjustment

The Beagle V2 camera uses an adjustable focus lens. This is adjusted manually by turning. HD images of 1080 pixels can be captured with ease.

Time-lapse videos for endless fun

The intelligent camera is equipped with 4 different time-lapse modes for automatic video creation:

► Clean time-lapse video

The hotend and heatbed move out of the frame automatically when a layer is finished. In the time-lapse video, the printed model grows as if by itself. Attention: This print mode results in longer print times.

► Normal time-lapse video

The camera takes the picture only when a layer is finished; the hotend and the heatbed are not moved out of the frame. The hotend is visible in the time-lapse video.

► Beagle UV Time Lapse

This time-lapse video is suitable for resin printing. For this you need a UV sensor in order to be able to create the time-lapse video at all. With the UV sensor, the camera takes the picture when it receives the signal from the UV sensor.

► Time-lapse video with timer

Record a time-lapse video without being connected to the printer. You can set the timing for the recording individually.

Simultaneous management of multiple 3D printers

The Beagleprint app allows you to manage multiple 3D printers at the same time. For this, you need one camera per device, which is controlled via the app. The camera is connected to the printer via USB.

Use in the browser

You can also access the Beagle V2 camera in the browser. All you have to do is find the IP address of the Beagleprint app (Camera settings > Camera information > IP address), enter it in the browser and log in. Make sure your PC is on the same LAN network as the Beagle V2 camera.

Broad compatibility with 3D printers

The Beagle V2 camera is compatible with a wide range of 3D printers. To find out whether your 3D device is also compatible with this camera with its attractive design, you can check the manufacturer's website: Compatibility list.

Technical specifications:

Guide for Klipper-Setup.