FormFutura High Performance Series Rigid Ceramic Resin White, 750 g
High-performance ceramic resin with excellent strength properties
CHF 124.00
(CHF 165.33 / kg, Price shown includes 8,1% VAT. - Excludes delivery costs)
Features & Advantages
- Phenomenal material stiffness
- Reinforced with nanoparticle ceramic
- Flexural modulus of 9.5 GPa
- Maximum flexural strength of 170 MPa
- Smooth and matt finish
Item no.: FF-HPSRCER-WHTE-00750, Content: 750 g, EAN: 8720574293920
Product information & technical details
- Item no.: FF-HPSRCER-WHTE-00750
- Manufacturer No.: HPSRCER-WHTE-00750
- Manufacturer: FormFutura
- Content: 750 g
- Product type: Resin
- Light source: LCD, DLP, SLA - Laser
- Color: White
Description
The high-performance ceramic resin from FormFutura is characterised by its phenomenal material rigidity and strength properties.
Because the resin has been reinforced with nanoparticle ceramics, it is one of the stiffest and strongest materials on the market. It achieves a flexural modulus of 9.5 GPa and a maximum flexural strength of 170 MPa.
In addition, the material has excellent chemical and heat-resistant properties.
The result is rigid models with an incredibly high level of detail and a smooth, matt finish.
Main Features of the High-Performance Series Rigid Ceramic Resin
- Reinforced with durable nanoparticle ceramic
- Excellent flexural modulus of 9.5 GPa
- Excellent flexural strength of up to 170 MPa
- Dimensionally stable under load
- High chemical and thermal resistance
- Good compatibility with all SLA, DLP and LCD / MSLA 3D printers in the range from 385 - 420 nm
Areas of application of High-Performance Series Rigid Ceramic Resin
- Fast prototyping in industrial quality
- Manufacture of electrical boxes
- Manufacture of fluid flow components
- Creation of aerodynamic test models
- 3D printing of injection moulds in short runs
Before you start printing
- Shake the bottle for at least 2 minutes before each use
- After shaking the bottle, let the resin sit for 10 minutes to allow air bubbles to escape from the resin.
- Always wear safety glasses and nitrile gloves when handling resin.
Note: The unused resin can be poured back into the bottle after the print is complete.
Post-processing
- The manufacturer recommends post-processing the print in order to achieve the best material properties.
- Rinse your model in IPA or ethanol for about 5 minutes.
- An ultrasonic cleaner is recommended.
- Make sure objects rinsed with IPA and/or ethanol are perfectly dry before further post-curing.
- Place the rinsed parts in a well-ventilated area for at least 30 minutes or use compressed air for at least 2 minutes.
- Cure your object in a high-performance curing chamber for approx. 20-30 minutes at 65 ° C. The preferred curing wavelength is between 300-410 nm.
Hazard and precautionary statements
Signal word: Warning
Precautionary statements:
- P261 - Avoid breathing dust/fume/gas/mist/vapours/spray.
- P264 - Wash thoroughly with plenty of water after use.
- P272 - Contaminated work clothing should not be allowed out of the workplace.
- P280 - Wear protective gloves/protective clothing/eye protection/face protection.
- P302+P352 - IF ON SKIN: Wash with plenty of water.
- P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P332+P313 - If skin irritation occurs: Get medical advice/attention.
- P333+P313 - If skin irritation or rash occurs: Get medical advice/attention.
- P337+P313 - If eye irritation persists: Get medical advice/attention.
- P501 - Dispose of contents/container according to local/national regulations.
Hazard statements:
- H315 - Causes skin irritation
- H317 - May cause an allergic skin reaction
- H319 - Causes serious eye irritation
Questions & Answers about High Performance Series Rigid Ceramic Resin White
-
Would it be possible to fire a cured print in a kiln?
-
Hi, Have you had experience using this resin with Creality HALOT-SKY CL-89. I would be interested to know how well this resin performs with the 4K monochrome screen. Also setting?
Customer Reviews
1 English review written for FormFutura High Performance Series Rigid Ceramic Resin White
3 customer reviews in all languages
| 5 stars | | 2 | (50%) |
|---|---|---|---|
| 4 stars | | 1 | (25%) |
| 3 stars | | 0 | (0%) |
| 2 stars | | 1 | (25%) |
| 1 Stars | | 0 | (0%) |
4 reviews
1 customer review in English
3 customer reviews in all languages
-
DanP
26 August 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating.
Related products
Customers also bought
Magazine Articles:
Discover 3DJake:
-
Switzerland: Free standard delivery from CHF 69.90
-
Delivery in 3 business days.
More than 10.500 products
We deliver worldwide to
more than 40 countries
under expectations
Rated with 2 out of 5 stars.
The resin is getting printed pretty easy, but cleaning after is a total mess like no other resin. The ceramic particles are very difficult to remove and for this reason I consider that this resin should be used with a dedicated vat.
The print is rigid, very brittle, but with a filling that particles are removed at each finger touch. In my opinion this is a very specialized resin for particular projects mostly engineering .
Was this rating helpful? (6) (0)