Extrudr Green-TEC PRO Black, 1.75 mm / 10000 g
High-performance material with a biological-organic composition
CHF 443.83 CHF 555.00 -20%
(CHF 44.38 / kg, Price shown includes 8,1% VAT. - Excludes delivery costs)
Features & Advantages
- 100% natural raw materials
- Outstanding mechanical & thermal resistance
- Very good layer adhesion
- Odour free
Item no.: EX-9010241425020, Content: 10.000 g, EAN: 9010241425020
Product information & technical details
- Item no.: EX-9010241425020
- Manufacturer No.: 9010241425020
- Manufacturer: Extrudr
- Content: 10.000 g
- Diameter: 1,75 mm, 2,85 mm
- Product type: Organically Composed Filaments
- Color: Black
- Compatibility: Bambu Lab AMS*
- RAL colour: RAL 9005
- System: Spool
- Recommended processing temperature: 210 - 230 °C
- Recommended heating temperature: 20 - 90 °C
Description
Green-TEC PRO is a development from Extrudr's BIO-Performance series and was specially developed for high-performance applications.
The material has been optimised for high rigidity and flexural strength. Models are given a high-quality, semi-matt surface.
Green-TEC PRO is made from 100% renewable and natural raw materials and, in contrast to PLA, which can only be degraded under certain laboratory conditions, is 100% reintegrated into the natural cycle.
Key features of Extrudr Green-TEC PRO
- 100% natural raw materials
- Excellent mechanical resistance
- High rigidity and flexural strength
- Slightly flexible for good absorption of loads
- Heat resistant up to 160°C
- Very good layer adhesion
- Minimal warping (< 0.5%)
- Biodegradable according to DIN EN ISO 14855
- Odour-free
Applications of Extrudr Green-TEC PRO
- Technical high-performance applications
Filament Spool Dimensions
Questions & Answers about Extrudr Green-TEC PRO Black
Customer Reviews
6 English reviews written for Extrudr Green-TEC PRO Black
34 customer reviews in all languages
| 5 stars | | 35 | (62%) |
|---|---|---|---|
| 4 stars | | 13 | (23%) |
| 3 stars | | 3 | (5%) |
| 2 stars | | 1 | (1%) |
| 1 Stars | | 4 | (7%) |
56 reviews
6 customer reviews in English
34 customer reviews in all languages
-
Sam
24 September 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Top quality
Rated with 5 out of 5 stars.
Prints beautifully, just like pla, nozzle 200° and 55° bed (ultrabase) with no fan.
No unpleasant smell like with abs, no need for enclosure, incredible strong layer adhesion, great strenght with 1.8mm walls and temperature resistance (tested at 150° in oven for more than 1h and it just got little soft but it didn't melt or shrink or deform or change the shape).
Compared to abs it's far superior in every way, and even it's almost twice the price of abs i might say it's worth it since it's better in every single way and it uses much less energy to print.Was this rating helpful? (4) (2)
-
Bas Borgignons
18 May 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Very, very good printresults, but check filament dimensions!
Rated with 4 out of 5 stars.
The results are absolutely stunning, and very strong. Just be sure to check the filament dimensions, the roll I had was what I would call out of tolerance. The filament was quite oval, and undersized (1.73mm by 1.70mm, measured with a good micrometer). I got only one roll, so this might be from a bad batch. However, after compensating for this in the slicer the results I got were good enough to make this one of my favourite filaments.
Was this rating helpful? (2) (1)
-
Not temperature resistant
Rated with 1 out of 5 stars.
Temperature resistance is not very good, when dipped in some water at 95C it becomes very soft and thin walls are floppy. I contacted Exrudr for advice but received no reply.
Was this rating helpful? (7) (1)
-
Vaggelis
01 July 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Bit expensive but very nice
Rated with 5 out of 5 stars.
Good mechanical properties, matte finish and melts great, albeit a bit pricey.
Was this rating helpful? (0) (0)
-
Nicholas
14 March 2019
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Review written by Nicholas
Rated with 5 out of 5 stars.
nice matte finish if run at 200° and no adhesive required on glass at 50-60°, bit of 3m tape for a nice lower surface finish. resists heat just fine and prints just as easy as PLA.
Was this rating helpful? (1) (1)
Related products
Customers also bought
Magazine Articles:
Discover 3DJake:
-
Switzerland: Free standard delivery from CHF 69.90
-
Delivery in 3 business days.
More than 10.150 products
We deliver worldwide to
more than 40 countries
The 800g spool weighs 230g
The 2500g spool weighs 600g
The 10000g spool weighs 1020g