DropEffect neXtG Fiber Hotend, Black

The DropEffect neXtG Fiber Hotend was specially developed for 3D printing applications with carbon and glass fibre reinforced materials.

Ultra High Flow Rate (UHF)

To achieve higher flow rates, the neXtG Fiber Hotend was developed with a new heating element and hotend design.

With the Ultra High Flow Nut Adapter, the melting zone can be expanded even further to achieve a maximum flow rate of up to 45 mm³/s.

Rigid kinematic coupling system

The kinematic coupling system of the neXtG Fiber Hotend ensures high rigidity of the heating block and noticeably minimises heat transfer to the heat sink.

The rigid structure takes on several protective functions:

• Protects the heater block from bending if bed levelling fails;
• Protects the heatbreak when the nozzle moves over a failed print.

Tip: The nozzle can be changed with one hand. Even if the nozzle is tightened too much, the heatbreak is protected by the rigid structure of the system.

Compatibility with V6 nozzles

Like its predecessor, the XG Hotend, the neXtG Fiber Hotend was equipped with the V6 nozzle system for more nozzle selection.

Same footprint as a Dragon Hotend

The neXtG Fiber has the same dimensions as the Dragon Hotend, making it compatible with most Dragon hotend attachment systems (e.g. Voron, Creality, etc.). With the Groove Mount Adapter, it can also be used on Prusa printers (e.g. MK2, MK3, etc.).

Optimised ceramic heating

The neXtG Fiber Hotend uses an efficient ceramic heating plate, which is more cost-effective and easier to maintain than a ceramic ring heater.

Tip: The neXtG Fiber Hotend is ready to use on Voron and Prusa 3D printers, it can also be adapted for Creality 3D printers. Special adapters are required for all other models.

Included:

• 1 x neXtG Fiber Hotend
• 1 x UHF silicone sock
• 1 x Groove Mount Adapter
• 1 x coated copper nut
• 1 x nozzle made of hardened steel, 0.4 mm
• 1 x nozzle made of hardened steel, 0.5 mm
• 1 x 1 m long white extension cable for the temperature sensor
• 1 x 1 m long extension cable for heating
• 1 x H1.5 hex key
• 1 x H2.0 hex key
• 4 x M2.5x5 countersunk hexagon screws
• 1 x thermal paste
• 4 x M3x8 hexagon socket countersunk head screw
• 2 x M2.0x4 hexagon socket screw with lens head
• 1 x M2.0x4.0 titanium alloy screw
• 1 x H5.0 open-end wrench
• 1 x H6.0 open-end wrench
• 1 x H7.0 open-end wrench
• 1 x H9.0 open-end wrench
• 1 x H10.0 open-end wrench
• 3 x cable ties
• 1 x Bowden cable
• 1 x Collet Clip

Technical specifications: