Creality K2 Plus Combo

Creality's K2 Plus Combo combines groundbreaking technology with intuitive usability and amazing multi-colour printing to take your projects to the next level.

Sturdy aluminium alloy frame

The sturdy unibody frame of the K2 Plus is custom-made from a die-cast aluminium alloy and CNC-milled. Maximum precision and stable printing behaviour are guaranteed even at high speeds.

Large build volume

With a build volume of 350 x 350 x 350 mm, the K2 Plus is suitable for printing large-format objects or several smaller objects at the same time. Your models will be produced in record time with breathtaking detail.

Speed ​​meets precision

Like its predecessors K1 and K1 Max, the K2 Plus is characterised by its high printing speed and precision. The 3D printer achieves printing speeds of up to ≤ 600 mm/s with an acceleration of ≤ 30000 mm/s².

Tip: The average noise level at standard speeds is less than 50 dB.

FOC closed-loop motors

Both the extruder and all XYZ axes of the K2 Plus are driven by closed servo motors. With 32768 microsteps per revolution, the motors achieve high torque and outstanding responsiveness. FOC control with variable voltages reduces heat build-up and prevents blockages caused by overheating.

Apus all-metal extruder with tri-metal heat protection nozzle

The K2 Plus uses a Direct Drive Apus all-metal extruder with tri-metal heat protection nozzle for precise and smooth extrusion. The nozzle is designed for printing temperatures of up to max. 350 °C and also enables the processing of high-performance materials.

Automatic anti-tilt levelling

Two optical distance sensors for automatic tilt adjustment of the build plate on the Z-axis and a strain gauge in the print head ensure precise levelling.

Additional features:

• 800-watt AC high-performance heating system with overheat protection and automatic shutdown in case of unexpected faults,
• Nozzle camera for pressure calibration and chamber camera for print monitoring and detection of printing errors,
• 4.3 inch colour touchscreen.

► Creality CFS

The K2 Plus Combo is equipped with the intelligent filament management system CFS (Colour Filament System). The multi-material system has 4 spool slots that support multi-colour printing and the simultaneous use of different materials. If the device is combined with other Colour Filament Systems, a total of 16-colour printing with a wide range of colour combinations can be carried out.

The system loads and unloads the filaments automatically - there is no need for time-consuming manual filament changes. In addition, the well-sealed multicolour device with smart temperature and humidity displays can be used as a filament drying box for keeping and storing the filaments.

Automatic RFID recognition of materials is supported.

Tip: The CFS can accommodate four 1 kg spools with a diameter of 197-202 mm and a width of 42-68 mm. Creality filaments with cardboard spools are compatible with the CFS. Filaments such as PLA, PETG, ABS, ASA or PA-CF can be easily processed in the CFS; flexible materials such as TPU or wet filaments such as PVA/BVOH are not supported.

Contents of Delivery:

• 1 x K2 Plus
• 1 x CFS
• 4 x Hyper PLA with RFID-Chip (Black, White, Red, Blue), 500 g each
• 1 x Tool Kit including:
  • Glue stick, lubricant
  • Flush cutter, scraper, L-key set
  • 8 x screwdriver bits, 2 x plug-in screwdriver bits, handle
  • Nozzle wiper
  • USB drive, 16 GB

• 1 x Filament Swatch for Creality Filaments
• 1 x 0.4 mm Nozzle for the K2 Plus
• 1 x Cutter + Cutter Rod
• 1 x Filament sensor circuit board

Technical specifications: