COMGROW T300

With an impressive build volume of 300 x 300 x 350 mm and an intelligent Klipper-based core, the T300 from COMGROW sets new standards in terms of speed, quality and user-friendliness!

All-metal design

In order to ensure the required stability and robustness during high-speed printing, both the frame and most of the other components of the T300 are made of metal.

Balanced build volume

The T300 has a spacious build volume of 300 x 300 x 350 mm, allowing you to explore limitless possibilities. The build area minimises limitations on print speed and acceleration, ensuring excellent print quality.

In a hurry

With a gear ratio of 6.5:1, the T300 's Dual Gear Direct Drive Extruder delivers an extrusion rate of up to 30 mm³/s and a maximum print speed of 600 mm/s. Thanks to powerful motors on the X and Y axes, an acceleration of 12,000 mm/s² is achieved.

Efficient cooling

The T300 features a 5025 high-speed fan for effective cooling of the extruded material. The fan operates at a speed of 8,500 rpm and, in combination with a circular duct piece, provides a strong airflow.

Short heating times

The T300 only needs 30 seconds to heat the nozzle and the heated bed to the required temperature.

4.3-inch touchscreen

The T300 features a 4.3-inch touchscreen with a resolution of 480 x 272 pixels and a viewing angle of 85°. With its clear display and responsive touch functionality, this screen makes operating the printer a simple and pleasant experience.

Automatic levelling over 81 points

You can automatically level the T300 's build plate using 81 points to get a perfect first layer! The build plate is automatically heated before levelling to adjust it to the actual flatness of the print.

Intelligent Klipper-based core

The T300 is based on the Klipper firmware and improves the overall performance of your 3D printer in many ways. Both the printing speed and the quality of the printed products are visibly increased.

Technical specifications: