BondTech LGX Lite Arrow for Creality

Upgrade kit compatible with LGX Lite only for use on:

• Creality CR-6 SE
• Creality CR-6 Max
• Creality CR-10 Smart

The plastic parts of the LGX Lite Arrow for Creality are made of grey polyamide (PA12) without colouring with a protective wax coating.

The extruder is not included in the set!
An LGX Lite extruder is required to use this kit.

• It converts compatible Bowden 3D printers into direct-drive extruders.
• The additional strain on the sensor (strain gauge) is limited to the LGX Lite itself.
• The housing is lightweight and isolated from the extruder to use a strain gauge sensor to allow levelling.
• It is compatible with all stock hotends and fans.
• The housing is easy to remove for maintenance and service of the hotend and extruder.
• The Z position of the fan shroud can be adjusted.

Features:

• Weight: 65g
• Stepper motor current: 0.45~0.65A max
• Maximum operating temperature: 90 °C

It can be upgraded with Slice Engineering Hotends:

• Copperhead Screw Mount
• Mosquito
• Mosquito Magnum
• Mosquito Magnum+ Air

Contents of delivery:

• 1x LGX Lite strain gauge mounting kit
• 1x case set LGX Lite Arrow
• 1x LGX Lite Arrow hardware mounting kit with:
• 4x M3x6 button head screw
• 4x M3x8 button head screw
• 2x M3x10 button head screw
• 1x M3x16 screw
• 2x M3x20 MC6S screw
• 1x M3x25 screw
• 4x M3 square nut
• 1x Capricorn cutter
• 1x 70mm Capricorn PTFE