AprintaPro PrintaFix Basic, 100 ml
The best solution for adhesion problems with 3D printing!
CHF 12.85
(CHF 128.50 / l, Price shown includes 8,1% VAT. - Excludes delivery costs)
Features & Advantages
- Simple application
- Low cost per print
- Good adhesion
- Made in Germany
Item no.: APP-001001, Content: 100 ml, EAN: 9120078080016
Product information & technical details
- Item no.: APP-001001
- Manufacturer No.: 001001
- Manufacturer: AprintaPro
- Content: 100 ml
- Product type: 3D Printer Accessories
Description
PrintaFix was specially developed for FDM / FFF 3D printing!
With PrintaFix, you no longer need BlueTape or similar adhesives. Due to the simple application and the superb adhesion qualities, PrintaFix stands out.
The spray can be used on both unheated and heated beds.
So warping is a thing of the past!
- Cost-effective application
- Fast use: shake and spray PrintaFix
- Environmentally friendly unlike hairspray and other solutions.
- Easily washable under warm water!
More information
Please shake bottle well before use.
Note: Set the spray head of the 500ml bottle to "Spray".
Excellent alternative to 3DLac, Magigoo etc.
Hazard and precautionary statements
Signal word: Danger
Precautionary statements:
- P101 - If medical advice is needed, have product container or label at hand.
- P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P337+P313 - If eye irritation persists: Get medical advice/attention.
Hazard statements:
- H225 - Highly flammable liquid and vapour
- H319 - Causes serious eye irritation
- H336 - May cause drowsiness or dizziness
Accessories
Product videos:
Manual
Questions & Answers about AprintaPro PrintaFix Basic
Customer Reviews
7 English reviews written for AprintaPro PrintaFix Basic
60 customer reviews in all languages
| 5 stars | | 86 | (67%) |
|---|---|---|---|
| 4 stars | | 26 | (20%) |
| 3 stars | | 7 | (5%) |
| 2 stars | | 5 | (3%) |
| 1 Stars | | 3 | (2%) |
127 reviews
7 customer reviews in English
60 customer reviews in all languages
-
Robert
14 December 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. -
Neven
06 July 2017
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Fancy
Rated with 5 out of 5 stars.
Good glue that not only fits both ABS and PLA, but also most other filaments. It comes with brief but sufficient instructions on how to use.
Easy to apply, and easy to remove. It's isopropyl based so the smell is much more pleasant, and is less of a fire hazard then acetone or hairspray.
You apply it directly on glossy aluminum or glass bed for best results. Bottom of the printed object ends up beautifully shiny, without artifacts and imperfections that you usually end up with after using hairspray, paper glue stick or ABS slurry.
Is the price justified? Bottom of the object will look nice, but you will spend about 5-10ml for one 200x200mm coat. You be the judge.Was this rating helpful? (9) (0)
-
Michael
03 April 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Excellent Product - AprintaPro PrintaFix
Rated with 5 out of 5 stars.
After trying to find a good glue to make my prints stick throughout the print, I came across PrintaFix.
I must say, im really happy with my purchase! Prints stick to the bed really well, every print! Its saved me lots of filament (No more failed prints).
Will purchase again!Was this rating helpful? (2) (0)
-
Terry
26 February 2019
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. AprintaPro
Rated with 5 out of 5 stars.
Received my order yesterday and did my first print which held very well, this will save a lot of frustration and lost prints. How often does the bed need to be sprayed to ensure a good fix??
Will sure buy again.Was this rating helpful? (3) (0)
-
Andrew
12 December 2018
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Review written by Andrew
Rated with 5 out of 5 stars.
We use this brand for all of our ABS 3D printing. We should move to PET-G, but we have crappy old Replicator 2X's, so no can do. This stuff works brilliantly. Keeps models locked down to the bed without warpage. The models can also be printed without a raft, if they are thin enough. Excellent product, recommended to us by several makers at the UK TCT show in November.
Was this rating helpful? (0) (1)
Related products
Customers also bought
Magazine Articles:
Discover 3DJake:
-
Switzerland: Free standard delivery from CHF 69.90
-
Delivery in 3 business days.
More than 10.500 products
We deliver worldwide to
more than 40 countries
Very good, but...
Rated with 4 out of 5 stars.
Very good adhesion, at this point, I truly believe this will make the filament stick to literally anything. But, and a big but, it most definitely does not wash easily with warm water. Not even scrupping with a rough side of the sponge and plenty of soap. And it leaves a residue at the pottom of the print, since it leaves the plate with it. Otherwise than that, I can wholeheartedly recommend it.
Was this rating helpful? (1) (0)