3DJAKE ecoResin Light Grey, 1.000 g
Inexpensive all-round resin for LCD & DLP printers
CHF 23.76 CHF 29.50 -19%
(CHF 23.76 / kg, Price shown includes 8,1% VAT. - Excludes delivery costs)
Features & Advantages
- Budget-friendly
- Low odour
- Fast curing
- Low shrinkage
- Versatile applications
- Made in EU
Item no.: AOE-RES-ECO-LGREY-1000, Content: 1.000 g, EAN: 9010707000839
Product information & technical details
Description
3DJake ecoResin is a budget-friendly 3D printing resin that can be used in a wide variety of applications and is specifically designed for LCD and DLP light sources.
The resin has good physical properties, cures quickly and produces precise 3D models with extremely low shrinkage and good post-processability. It is also almost odourless.
Note: Shake well before use!
Key features of 3DJake ecoResin
- Unbeatable price
- High level of detail
- Strong contours, beautiful-looking surfaces
- Low odour
- Fast curing
- Numerous application possibilities
- Good physical properties
- Made in EU
- Simple post-processing (e.g. painting)
In order for the model to turn light grey after printing, it must be post-cured for a longer period of time, depending on the size.
More information
Why do some of our 3D printing resins have a slight yellow tinge?
For our resins, which are produced in Austria, we rely on a photoinitiator (the ingredient that triggers the reaction with UV light) called BPO.
In contrast to the most commonly used TPO, this is characterised by its much lower toxicity and is therefore also often used in medical resins.
For us, the decision is clear: your health comes before the optical properties of the material, but we do our best to make our resins look great.
Stay tuned for our latest developments.
Hazard and precautionary statements
Signal word: Warning
Precautionary statements:
- P101 - If medical advice is needed, have product container or label at hand.
- P102 - Keep out of reach of children.
- P103 - Read label before use.
- P261 - Avoid breathing dust/fume/gas/mist/vapours/spray.
- P280 - Wear protective gloves/protective clothing/eye protection/face protection.
- P302+P352 - IF ON SKIN: Wash with plenty of water.
- P333+P313 - If skin irritation or rash occurs: Get medical advice/attention.
- P501 - Dispose of contents/container at a special hazardous waste collection point.
Hazard statements:
- H315 - Causes skin irritation
- H317 - May cause an allergic skin reaction
- H319 - Causes serious eye irritation
- H410 - Very toxic to aquatic life with long lasting effects
- EUH 205 - Contains epoxy constituents. May produce an allergic reaction.
Questions & Answers about 3DJAKE ecoResin Light Grey
-
I have the Anycubic Photon Mono M5 What is a good curing and exposure time? In Anycubic Photon Workshop there is a setting, where one can add different resin settings.
Customer Reviews
6 English reviews written for 3DJAKE ecoResin Light Grey
38 customer reviews in all languages
| 5 stars | | 40 | (51%) |
|---|---|---|---|
| 4 stars | | 20 | (25%) |
| 3 stars | | 7 | (9%) |
| 2 stars | | 1 | (1%) |
| 1 Stars | | 9 | (11%) |
77 reviews
6 customer reviews in English
38 customer reviews in all languages
-
ruebenritter
28 June 2024
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Content - kinda green
Rated with 5 out of 5 stars.
Bought my first resin printer this week (Saturn 3 Ultra) and since i'm quite happy with the ecoPLA went with the ecoRESIN Light Grey.
Using the cones of calibration i arrived at preliminary print values 2,8s/0.05mm + 28s/1st but it looks like even shorter exposure times could be possible and improve the results.
The first 28mm miniature came out very nice but no matter the curing time it's more of a light grey green than grey. It looked very sharp to me but i have no comparison what an 8k resin might achieve. Either way i'm very happy with my first results.
+ prints well
+ little odor
- green tint
Edit: After printing a bit more with it i upgraded it to 5 stars as the yellowing is negligible and i don't think i can ask for more from a resin at this price.Was this rating helpful? (2) (0)
-
Arron
16 February 2023
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Light grey - disappointed
Rated with 3 out of 5 stars.
I was really looking forward to this resin, the first couple of prints came out green, I was told it just needs to cure longer, which I have, 30 minutes makes it hard, but it's still green. I have a liter of it, so far after using about 500ml only a couple of prints looked grey, so there must be at least some pigment in there. I have an elegoo mars 3, tried a few different settings and exposure times and just not happy with it. On a positive though, there is no odour what so ever, which is really good. I am sure if they work on the product further they may overcome the colour issue.
Was this rating helpful? (3) (0)
-
William
30 May 2023
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Finns ingen lukt
Rated with 5 out of 5 stars.
Perfekt resin för en mindre lägenhet, fungerar super bra och är lätt att använda. Kan fortfarande rekommendera en luftrenare som Elegoo luftrenare för ett extra skydd.
Was this rating helpful? (3) (0)
-
Rob
23 May 2023
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. resin color
Rated with 4 out of 5 stars.
Resin is ok but its not a light grey color. Its more like butter white beige color with a bit of green tone. Hard to explain the color :). So if you want to have real grey color of your prints go for dark grey color of resin.
Was this rating helpful? (3) (0)
-
Fred
28 August 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Perfect
Rated with 5 out of 5 stars.
Do the job...
Was this rating helpful? (5) (1)
Related products
Customers also bought
Magazine Articles:
Discover 3DJake:
-
Switzerland: Free standard delivery from CHF 69.90
-
Delivery in 3 business days.
More than 10.500 products
We deliver worldwide to
more than 40 countries
I usually use 3,2 sec./0,03mm and 3,5sec./0,05mm on my Sonic Mini 4k.
Maybe you can use these as a reference.